Le produit de Pass4Test peut assurer les candidats à réussir le test Genesys GE0-703 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Pass4Test vous promet de vous aider à passer le test Genesys GE0-703, vous pouvez télécharger maintenant les Q&As partielles de test Genesys GE0-703 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Genesys GE0-703 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Genesys GE0-703, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Genesys GE0-703. Peut-être d'obtenir le Certificat Genesys GE0-703 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Genesys GE0-703 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
Si vous vous inscriez le test Genesys GE0-703, vous devez choisir une bonne Q&A. Le test Genesys GE0-703 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Code d'Examen: GE0-703
Nom d'Examen: Genesys (GCP7 - Consultant, Voice Enterprise Edition)
Questions et réponses: 108 Q&As
GE0-703 Démo gratuit à télécharger: http://www.pass4test.fr/GE0-703.html
NO.1 Which of the following are Windows prerequisites for VCS?
A. there are no Windows prerequisites
B. Active Directory
C. IIS and SNMP
D. SQL Server
Answer: C
Genesys certification GE0-703 certification GE0-703
NO.2 Which VCS/IPCS component controls the TDM telephony or IP Telephony interfaces?
A. PopGateway
B. Page Collector
C. MRCP Client
D. Net Management
Answer: A
Genesys certification GE0-703 GE0-703 GE0-703
NO.3 The <DNIS>.XML and <Application_Name>.xml files are generated when __________.
A. a call arrives at the VCS
B. an application is created and configured in EMPS
C. the WatchDog on the EMPS is restarted
D. requested by the IVR Server
Answer: B
Genesys examen certification GE0-703 GE0-703
NO.4 Which version of the VoiceXML Specification does GVP version 7.5 support?
A. VoiceXML 1.0
B. VoiceXML 1.1
C. VoiceXML 2.0
D. VoiceXML 3.0
Answer: C
Genesys GE0-703 GE0-703 GE0-703 certification GE0-703
NO.5 The DNIS.xml provides __________.
A. the Primary Application URL
B. all application configuration information but no process information
C. the address of the IVR Server
D. the URL path to the <Application_Name>.XML
Answer: D
certification Genesys GE0-703 examen certification GE0-703 GE0-703 examen GE0-703 examen
NO.6 After WatchDog is started, GVP.ini file contains __________.
A. no configuration information for VCS/IPCS processes
B. application specific configuration information such as DNIS
C. the configuration information for VCS/IPCS processes, such as default log levels
D. only Dialogic configuration information
Answer: C
Genesys GE0-703 GE0-703 GE0-703
NO.7 In the <Application_Name>.xml file, the IVRTimeout value determines __________.
A. how long URS waits for the response from web server before timing out and trying default routing
target.
B. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Backup IVR URL.
C. how long GQA waits for the connection with the IVR Server before using the Backup IVR URL.
D. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Primary IVR URL.
Answer: B
Genesys certification GE0-703 GE0-703
NO.8 How are VoiceXML pages produced during a GVP call session?
A. Web application server generates VoiceXML when processing asp or jsp pages
B. VCS or IPCS produce VoiceXML when the call is initiated
C. EMPS produces VoiceXML when the request comes in
D. IPCS creates the VoiceXML when it relays SIP messages
Answer: A
Genesys GE0-703 certification GE0-703 GE0-703 examen
NO.9 The GVP VoiceXML application logic resides on __________.
A. a web server
B. the VCS
C. the VPM
D. the IPCM
Answer: A
Genesys GE0-703 GE0-703 GE0-703 examen
NO.10 The <Application_Name>.xml files provides all of the __________.
A. VCS configuration information
B. voice application information
C. IPCS configuration information
D. web server configuration information
Answer: B
certification Genesys GE0-703 examen certification GE0-703 certification GE0-703
NO.11 A Primary Voice Application URL is required when provisioning the IVR Profile. The Primary Voice
Application CANNOT include __________.
A. the fully qualified name of the web server that hosts the application
B. the numeric IP address of the web server that hosts the application
C. the name of the first page of the voice application
D. the path to the <Application Name>.XML file
Answer: D
Genesys certification GE0-703 certification GE0-703 GE0-703 certification GE0-703 GE0-703 examen
NO.12 Which of the following features can be changed using the Element Management System (EMS) GUI
when monitoring a VCS?
A. the log level for each process
B. the default directory for logging
C. the Behind or In-Front configuration for that particular VCS
D. the speech recognition vendor for that particular VCS
Answer: A
certification Genesys GE0-703 certification GE0-703
NO.13 In an In-Front of the Switch configuration using Genesys Framework, __________.
A. the VCS receives all call routing information from the strategy
B. the DNIS must be delivered to the VCS with the call
C. a connection with the IVR Server is required
D. ANI is required to initiate or begin the call.
Answer: B
Genesys certification GE0-703 GE0-703 GE0-703 GE0-703
NO.14 Which GVP software component is used to configure the various components of GVP including
application provisioning?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: A
certification Genesys GE0-703 GE0-703
NO.15 The ability to record the caller's speech for application analysis is configured in an IVR Profile within
the EMPS and is referred to as __________.
A. OA&M
B. EMS Runtime
C. Enable ASR Transcoding
D. Enable ASR Logging
Answer: D
certification Genesys certification GE0-703 GE0-703 examen certification GE0-703
NO.16 A logical group of ports is referred to as a __________.
A. Telephony Manager
B. Route
C. Page Collector
D. MRCP Client
Answer: B
Genesys GE0-703 GE0-703 examen certification GE0-703 GE0-703
NO.17 Refer to the CTI Property tab in the Provisioning IVR profile section in the EMPS. The Default Route
Number is used when __________.
A. IVR Server is unable to contact the Solution Control Interface (SCI)
B. IVR Server is unable to contact the Universal Routing Server (URS), or when the URS is unable to
find an agent number to which it can route the call
C. IVR component, specifically Genesys Queue Adapter (GQA), cannot communicate with SCS.
D. IVR Server component cannot communicate with the Web Server
Answer: B
certification Genesys certification GE0-703 GE0-703
NO.18 When would you use the Import Server Instance CSV feature in EMPS?
A. Never. This feature is not available through the EMPS
B. Any time you want to make a change to any of the parameters in EMPS
C. You want to start the Watchdog service
D. When numerous changes are needed with servers or configuration of various components for a
server and in conjunction with Genesys Technical Support
Answer: D
certification Genesys GE0-703 examen GE0-703 GE0-703
NO.19 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A
Genesys examen GE0-703 GE0-703 GE0-703 examen GE0-703
NO.20 In a Behind the Switch configuration, the VCS carries out instructions from __________.
A. IVR Server only, in the form of IVR ServerXML
B. T-Server only, in the form of TLib Events
C. Web Server, in the form of VoiceXML
D. IVR Server client, in the form of XML
Answer: C
Genesys examen GE0-703 examen GE0-703 examen GE0-703 GE0-703 examen
NO.21 To bring up the 9810 listener window in EMPS you need to expand Server, CORE, click on
<ServerName> and then follow which links?
A. Right-click on the Server and view
B. Click link for Network Management GUI to open the 9810 listener
C. Click the link for Server Explorer to open the 9810 listener
D. There are no available links for the 9810 listener window in the EMPS.
Answer: B
certification Genesys GE0-703 GE0-703 GE0-703 GE0-703 examen
NO.22 The process on the VCS/IPCS that starts the other component processes is the __________.
A. Page Collector
B. IVR Server Client
C. Call Flow Assistant
D. WatchDog
Answer: D
Genesys examen certification GE0-703 certification GE0-703 GE0-703
NO.23 Under what circumstances is a username and password required to access the EMPS?
A. Never. By default, a username and password is not required since EMPS is only used for monitoring
purposes.
B. Always. When opening EMPS Login screen, the system will require users enter their username and
password.
C. Only when the EMPS is being accessed from a remote workstation. You are automatically
authenticated and can log in from a local machine.
D. Only when using SunOne Directory Server because OpenLDAP has no built-in security for the EMPS
login screen.
Answer: B
Genesys examen certification GE0-703 GE0-703
NO.24 Which GVP application is used to build and test voice applications?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: D
Genesys certification GE0-703 certification GE0-703
NO.25 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A
Genesys GE0-703 examen certification GE0-703 GE0-703 GE0-703
NO.26 Where is the default location of the DNIS Application Mapping Files?
A. <install dir>\CN\data
B. <install dir>\CN\web\dispenser\spd_data
C. <install dir>\CN\config
D. http://EMPS:9810/spm
Answer: B
certification Genesys certification GE0-703 certification GE0-703
NO.27 The Voice Communication Server (VCS) processes __________ calls.
A. VoIP
B. IPCS
C. Web-based GUI
D. TDM
Answer: D
Genesys examen GE0-703 examen GE0-703 certification GE0-703
NO.28 For most deployments with VCS configured in Behind-the-Switch mode using Genesys Framework,
DNIS is obtained through what mechanism?
A. VCS request to the T-Server via IVR Server
B. VCS requests to the Dialogic telephony board
C. a route point corresponding to the appropriate strategy
D. VCS request directly to the ACD/PBX
Answer: A
Genesys examen GE0-703 GE0-703 certification GE0-703
NO.29 When the parameter localconfig is set equal to 1 (localconfig = 1) in GVP.ini, the WatchDog service
will __________.
A. not read the local GVP.ini file, using the latest configuration contained in the LDAP database for the
VCS/IPCS parameter settings
B. read the local GVP.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
C. read the local watchdog.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
D. read the local EMPS.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
Answer: B
certification Genesys certification GE0-703 certification GE0-703 GE0-703
NO.30 When you make a change to a parameter, such as PopGateway, Route1, Route Type - from InBound
to OutBound, what needs to happen for this change to go into effect?
A. restart WatchDog
B. no need to restart anything. New parameter value goes into effect immediately
C. restart the EMPS
D. restart MRCP Server
Answer: A
Genesys GE0-703 examen GE0-703 GE0-703 GE0-703 examen GE0-703 examen
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
没有评论:
发表评论