Après une longue attente, les documentations de test Microsoft 70-545 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 70-545 à la première fois.
On peut voir que beaucoup de candidats ratent le test Microsoft 70-545 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 70-545 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 70-545, Pass4Test peut offrir les Q&As des autres test Certification IT.
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test Microsoft 70-545 par une seule fois, vous n'aurez pas aucune raison à refuser.
Code d'Examen: 70-545
Nom d'Examen: Microsoft (TS: Microsoft Visio 2007, Application)
Questions et réponses: 86 Q&As
Le test Microsoft 70-545 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft 70-545 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft 70-545.
70-545 Démo gratuit à télécharger: http://www.pass4test.fr/70-545.html
NO.1 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft examen 70-545 70-545 certification 70-545
NO.2 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007.
The solution must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs. Users
must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft examen certification 70-545 70-545
NO.3 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an action after the Visio 2007 application flushes its events queue. What should you do?
A. ListenforAppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft examen certification 70-545 70-545 certification 70-545
NO.4 You create a custom template and several custom stencils. You need the stencils to open automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft examen 70-545 examen 70-545 certification 70-545
NO.5 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster, objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage references the current page. The object objWindow references the active window. You need to create several shape instances of the master on the current page at specific coordinates in the active window. Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
certification Microsoft 70-545 70-545
NO.6 You have a Windows Forms application that contains an embedded Visio Drawing Control.
You have an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the
application to load and display the drawing as a template by using the Visio Drawing Control.
Which code should you add to the application?
A. Me.axDrawingControl1. Document.Application.Documents.Open( "C:\Template.VSD ")
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked) Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft 70-545 examen 70-545 70-545 examen
NO.7 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the event that there is a fault in the application. What are three possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. CreateaVBAsolution.
B. CreateaVSLsolution.
C. Create an EXE add-on solution.
D. CreateaSharedAdd-insolution,andthenusetheCOMShimWizardtocreateaDLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
certification Microsoft 70-545 70-545 70-545 70-545 examen 70-545
NO.8 You are developing an Office Visio 2007 SharedAdd-in.
You construct an event sink class that listens to events from the Visio 2007 Application,
Document, Page, and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCodeAs Short,
ByVal sourceAs Object,
ByVal eventIdAs Integer,
ByVal eventSequenceNumberAs Integer,
ByVal subjectAs Object,
ByVal moreInformationAs Object)As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft certification 70-545 70-545 70-545 examen
NO.9 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by using a Dynamic Connector shape. In your application, you create an object named myVisioApp that references the Visio Application object. You need to add code to your application to connect the 2-D shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2), visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) , visAutoConnectDirRight )
Answer: C
Microsoft examen 70-545 certification 70-545 certification 70-545
NO.10 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
certification Microsoft certification 70-545 70-545
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Microsoft 70-545. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Microsoft 70-545. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
没有评论:
发表评论