Selon les feedbacks offerts par les candidats, c'est facile à réussir le test HP HP0-Y36 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification HP HP0-Y36. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test HP HP0-Y36, vous aurez une meilleure préparation avec l'aide de Pass4Test.
C'est sûr que le Certificat HP HP0-Y36 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test HP HP0-Y36, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat HP HP0-Y36 peut bien tester la professionnalité de IT.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A HP HP0-Y36 comme votre guide d'étude.
Code d'Examen: HP0-Y36
Nom d'Examen: HP (Deploying HP Enterprise Networks)
Questions et réponses: 73 Q&As
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A HP HP0-Y36 de Pass4Test.
HP0-Y36 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y36.html
NO.1 Which technology in an MPLS L2VPN can provide ordered delivery of Ethernet frames?
A. TCP-based L2VPN
B. Control Word
C. Ethernet raw access circuit
D. VLAN pseudowire class
E. MPLS EXP bits
Answer: B
HP HP0-Y36 HP0-Y36 examen HP0-Y36 examen HP0-Y36 examen certification HP0-Y36
NO.2 Click the Exhibit button.
A provider of MPLS services offers multiple types of MPLS-based VPNs to its customers. Provider Edge
router PE-1 directly connects to the following three customers:
What is the minimum number of LDP peers established on Router PE-1?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B
certification HP HP0-Y36 HP0-Y36 HP0-Y36
NO.3 Which BGP attributes must be present in a BGP routing update? (Select three.)
A. community
B. MED
C. origin type
D. local preference
E. AS path
F. next hop
Answer: C,E,F
HP examen certification HP0-Y36 certification HP0-Y36 HP0-Y36
NO.4 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A Site 1 successfully pings Customer A Site 2. This ICMP echo request is
captured on the Ethernet segment between routers P-10 and P-20. What is found on this packet capture?
(Select two.)
A. MPLS VPN label
B. VPN target
C. MPLS outer label corresponding to the LSR-ID of P-20
D. MPLS outer label corresponding to FEC 16.0.0.2
E. route distinguisher
Answer: A,D
HP HP0-Y36 HP0-Y36 examen HP0-Y36 HP0-Y36
NO.5 Click the Exhibit button.
Router-1 and Router-2 are BGP peers. Router-2 and Router-3 are BGP peers. However, Router-3 has not
learned the 16.0.0.0/8 BGP route. How can you resolve this issue? (Select two.)
A. Enable IGP synchronization on all routers.
B. Prepend AS1 to the 16.0.0.0/8 route on Router-1.
C. Enable BGP peering between Router-1 and Router-3.
D. Adjust the local preference of 16.0.0.0/8 on Router-1.
E. Configure Router-2 as a route reflector and Router-1 and Router-3 as clients.
F. Establish a physical link between Router-1 and Router-3.
Answer: C,E
HP examen HP0-Y36 examen HP0-Y36 certification HP0-Y36 HP0-Y36 examen HP0-Y36
NO.6 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider has established only four Multi-Protocol BGP peers as shown in the exhibit. PE-4 has no
customer connections. Neither MPLS L3VPN is functional. Which configuration steps are required if this
topology is to be operational for both customers.? (Select two.)
A. Create VPN instances Customer A and Customer B on PE-4.
B. Configure PE-4 as a route-reflector within the bgp l3vpn-family.
C. Configure PE-4 as a route-reflector within the ipv4-family vpnv4.
D. Configure PE-4 as a route-reflector within the ipv4-family vpn-instance Cust-A and vpn-instance
Customer B.
E. Configure PE-4 as a bgp route-reflector.
F. Configure MBGP peers for P-10, P-20, and P-30.
Answer: A,C
certification HP HP0-Y36 examen HP0-Y36 HP0-Y36 HP0-Y36 examen
NO.7 Which parameters must be configured on two PE routers to provision an Ethernet L2VPN in Martini
mode? (Select four.)
A. PW-ID
B. LDP Remote Peer
C. VPN Instance
D. Service Instance
E. S-VID
F. L2VPN Address Family
G. Route Distinguisher
H. IP Binding
Answer: A,B,D,E
HP examen HP0-Y36 certification HP0-Y36 HP0-Y36 examen HP0-Y36
NO.8 In the configuration of a Martini version L2VPN on two PE routers, which parameter must be identical?
A. S-VID
B. PW-ID
C. VLAN-ID
D. Service Instance number
E. VPN-Target
F. Remote LDP Peer IP address
Answer: B
HP HP0-Y36 HP0-Y36 examen
NO.9 What can be included in BGP or multi-protocol BGP Network Layer Reachability Information (NLRI)?
(Select three.)
A. AS 65001
B. 10.0.0.0 /9
C. MED
D. Remote LDP Session
E. BGP ORF
F. VPN Target
G. VPLS Label Block
H. 6500:301:192.168.0.0 /16
Answer: B,G,H
HP HP0-Y36 HP0-Y36
NO.10 Which characteristics of a Circuit Cross Connect (CCC) L2VPN distinguish it from the Martini or
Kompella versions? (Select two.)
A. It requires a stack of three MPLS labels.
B. It includes exactly two endpoints of the VPN.
C. It can operate with fewer than two MPLS labels.
D. It does not require any Label signaling.
Answer: C,D
HP HP0-Y36 examen HP0-Y36 HP0-Y36 examen
Bien qu'il ne soit pas facile à réussir le test HP HP0-Y36, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test HP HP0-Y36, mais encore à vous aider d'économiser votre temps.
没有评论:
发表评论