Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-Y26. Votre argent sera tout rendu si vous échouez le test.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A HP HP0-Y26 comme votre guide d'étude.
Code d'Examen: HP0-Y26
Nom d'Examen: HP (Building a Complete HP ProCurve Mobility Solution)
Questions et réponses: 73 Q&As
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test HP HP0-Y26 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Après une longue attente, les documentations de test HP HP0-Y26 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test HP HP0-Y26 à la première fois.
HP0-Y26 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y26.html
NO.1 You must configure an HP ProCurve Switch 8212zl to be the Backup router for a VRID associated with
VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A. It must be an address assigned to a muti-netted interface
B. It must be an address that is not assigned to any interface on either router.
C. It must match the Backup router s address for the VLAN 10 interface.
D. It must match the Owner router s address for the VLAN 10 interface
Answer: D
HP examen certification HP0-Y26 certification HP0-Y26 HP0-Y26 examen
NO.2 You have verified that an HP ProCurve Switch 3500yl is correctly configured for PIM dense mode. The
witch s IGMP table shows active hosts that are memebers of multicast group 239.193.22.22. The muticast
is in progress, and all hosts are reciving the content ,However, the muticast group does not appear in the
witch s PIM route table.
What does this indicate about the 239.193.22.22 muticast group?
A. The switch is forwarding the muticast at Layer2.
B. Other muticast routers are configured for PIM sparse.
C. The server and IGMP hosts are in different VLANs.
D. The switch is Querier for the group.
Answer: A
HP examen certification HP0-Y26 HP0-Y26 examen certification HP0-Y26
NO.3 You must design an MSTP solution for a customer network that uses HP ProCurve 5412zl switches in
the core and 3500yl switches at the edge. All switches will belong to single MST region. How can you
determine how may MST instances will be required to ensure that all links are in a forwarding state for at
least one VLAN?
A. Determine how many switches have identical VLAN configurations
B. Count the nubmer of redundant paths between the core and one edge switch.
C. Count the switches at the network edge
D. Determine the total number of VLANs configured on the switches.
Answer: B
HP HP0-Y26 HP0-Y26 HP0-Y26 examen HP0-Y26 examen
NO.4 You have enable Dynamic ARP Protection on an HP ProCurve 5406zl switch.When is it necessary to
define IP-to MAC address bindings?
A. when you must lock down the switch s IP addresses to its base MAC address
B. when you must specify clients connected to untrusted ports
C. when you must identify devices that do not use DHCP,but have a static IP address assigned.
D. when you must protect uplink ports that connect to other swithes that do not support Dynamic ARP
Protection.
E. when you must provide sevurity to ports where different clients may connect at different times
Answer: C
HP HP0-Y26 HP0-Y26 examen HP0-Y26 examen certification HP0-Y26
NO.5 You must configure an Hp ProCurve switch 8212zl to be the Owner of a VRID associated with VLAN 10.
What must e true of the virtual IP address for the VRID?
A. It must be an address on a muti-ntted interface
B. It must match the router s address for the VLAN 10 interface
C. It must match the address assigned to VLAN 10 on the Backup router.
D. It must use a classful network mask
Answer: B
certification HP certification HP0-Y26 HP0-Y26 examen certification HP0-Y26
NO.6 A customer requires high levels of redundancy and availability for a critical business network that uses
two HP ProCurve 8212zl switches in the core. What is a potential advantage of deploying the VRRP on
thest switches?
A. It will enable the switches to learn redudant paths to remote networks
B. It will enable the switches to provide redundant default gateways to clicents.
C. It will enable the configuration of redundant gateways on VRRP-aware clients
D. It will enable the switches to provide redundant links to the distribution layer.
Answer: B
HP HP0-Y26 HP0-Y26 HP0-Y26
NO.7 Click the Exhibit button
What is the role of the HP ProCurve Switch 3500yl in the OSPF routing domain?
A. ABR in areas 5 and 0
B. ASBR in areas 5 and 0
C. internal router in area 5
D. internal router in area 0
Answer: A
certification HP HP0-Y26 HP0-Y26 certification HP0-Y26 HP0-Y26 examen
NO.8 On an HP ProCurve switch 8212zl, which feature must be enabled before you can enable VRRP?
A. IP routing
B. a dynamic routing protocol
C. MSTP
D. IP muticast
Answer: A
HP certification HP0-Y26 HP0-Y26 examen HP0-Y26 HP0-Y26
NO.9 what is the effect of the following command , entered at the CLI of an Hp ProCurve Switches 5412zl?
5412zl(ospf)#redistribute rip
A. The router will assume the role of ASBR
B. The router will become eligible for election as DR
C. The router will assume the role of ABR
D. The router will summarize RIP routes in OSPF LSAs
Answer: A
HP certification HP0-Y26 HP0-Y26
NO.10 You must use the web management interface of an HP MSM710 Controller to perform a manual
upgrade of the controller s software. In the management interface . which location must be specified as
the source for the software file?
A. TFTP server
B. your workstation
C. controller auxilary port
D. your FTP server
Answer: B
certification HP HP0-Y26 HP0-Y26
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification HP HP0-Y26, et aussi une meilleure assurance du succès du test HP0-Y26. Vous choisissez Pass4Test, vous choisissez le succès.
