2013年8月11日星期日

Pass4Test offre de HP HP0-J51 matériaux d'essai

Pass4Test vous offre un choix meilleur pour faire votre préparation de test HP HP0-J51 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de HP HP0-J51 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test HP HP0-J51 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.


Pass4Test est un seul site de provider le guide d'étude HP HP0-J51 de qualité. Peut-être que vous voyiez aussi les Q&A HP HP0-J51 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.


Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test HP HP0-J51.


La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel HP HP0-J51 peut vous assurer à réussir 100% le test HP HP0-J51. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.


Code d'Examen: HP0-J51

Nom d'Examen: HP (Installing HP StorageWorks Solutions)

Questions et réponses: 123 Q&As

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test HP HP0-J51 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test HP HP0-J51 réel est lancée. C'est possible à réussir 100% avec le produit de HP HP0-J51. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.


HP0-J51 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J51.html


NO.1 Which D2D network configuration mode will improve the availability of overall network bandwidth?
A. Single Port Configuration
B. Dual Port Configuration
C. High Availability (Port Failover) Configuration
D. High Availability (Link Aggregation) Configuration
Answer: D

HP   HP0-J51   HP0-J51

NO.2 You are meeting with a customer who has many different backup applications and operating systems.
To identify which operating systems are supported with each backup application by VLS and D2D, which
HP document should you consult?
A. Storage Compatibility Matrix
B. EBS Compatibility Matrix
C. Backup Solutions Guide
D. Storage Backup Matrix
Answer: B

HP examen   HP0-J51 examen   HP0-J51   certification HP0-J51

NO.3 In the Storage Management Utility for a P2000 G3, which wizards are available to allow you to quickly
and easily set up the system? (Select two.)
A. Drive Wizard
B. Configuration Wizard
C. Replication Setup Wizard
D. Hosts Wizard
E. Physical Setup Wizard
Answer: B,C

HP   HP0-J51   certification HP0-J51

NO.4 A consultant is discussing with a customer how to create a four node multi-site cluster with the P4000
G2 family of products. The customer wants two physical sites, one being the primary. What is the
minimum total number of managers that should be run to guarantee quorum?
A. 2
B. 3
C. 4
D. 5
Answer: B

HP   certification HP0-J51   HP0-J51   HP0-J51

NO.5 A customer wants to add a drive enclosure to his existing P2000 G3 system. What is the maximum
distance allowed between enclosures?
A. 1m
B. 2m
C. 5m
D. 10m
Answer: B

certification HP   HP0-J51   HP0-J51

NO.6 Which HP P4000 management tool should you use to gather storage system status information?
A. Centralized Management Console (CMC)
B. HP Integrated Lights Out (ILO)
C. Web Based Enterprise Management (WBEM)
D. System Management Homepage (SMH)
Answer: A

HP   certification HP0-J51   HP0-J51

NO.7 What information is displayed in the Configuration View panel overview of the P2000 SMU about the
status of any FC hosts attached to it? (Select two.)
A. connection type
B. WWPN
C. HBA Firmware revision
D. operating system
E. profile
Answer: B,E

HP   certification HP0-J51   HP0-J51 examen

NO.8 What is the recommended minimum block size that should be configured when backing up to D2D
systems?
A. 64KB
B. 128KB
C. 256KB
D. 1MB
Answer: A

HP   HP0-J51   HP0-J51

NO.9 Where can you find the DHCP-assigned IP address on your D2D system during initial
configuration?
A. Web Management Interface
B. VGA Console
C. Telnet
D. CommandView TL
Answer: B

certification HP   certification HP0-J51   HP0-J51

NO.10 Which CLI command is used to verify the setting of the IP address of a P2000 G3 Storage Array?
A. show ip-address
B. show network-parameters
C. show network-address
D. show network
Answer: B

certification HP   HP0-J51   certification HP0-J51   HP0-J51   certification HP0-J51

NO.11 What is a feature of P4000 snapshots?
A. Snapshots are thin provisioned but can be made fully provisioned after being created.
B. As the original volume data changes the snapshot remains the same as the volume at its creation time.
C. The same amount of space is reserved for the snapshot as the original volume.
D. The snapshot is thinly provisioned and requires no reserve space.
Answer: D

HP   HP0-J51   HP0-J51   HP0-J51 examen

NO.12 Your customer wants to monitor the performance of a P4000 G2 system. What is the minimum time
sample interval that can be set using the Performance Monitor?
A. 1 second
B. 5 seconds
C. 30 seconds
D. 1 minute
Answer: B

HP   HP0-J51 examen   HP0-J51   HP0-J51   HP0-J51 examen

NO.13 A consultant meets with a customer to define a Disaster Recovery plan based on HP VLS technology.
What are the most important parameters the consultant must obtain from the customer.? (Select two.)
A. Recovery Point Objective
B. Restore Point Objective
C. Recovery Time Objective
D. Retention Point Objective
E. Retention Time Objective
Answer: A,C

HP   HP0-J51   HP0-J51 examen   HP0-J51 examen

NO.14 Which P2000 G3 Combo FC/iSCSI controller ports would be most suitable for replicating snapshots to
remote locations?
A. 1GbE iSCSI
B. 10GbE iSCSI
C. 4Gb FC
D. 8Gb FC
Answer: A

HP   HP0-J51 examen   certification HP0-J51

NO.15 When running diagnostics on a P4000 system you notice that the "BBU Capacity Test" is unchecked by
default. Why is this? (Select two.)
A. The test is not supported on any P4000 system.
B. The test can take up to 24 hours to complete.
C. The test can overwrite HDD data.
D. The test sends data to HP via the Internet.
E. The test turns off the controller's cache.
Answer: B,E

HP   HP0-J51   HP0-J51

NO.16 In an HP P2000 storage array, the Drive Spin Down (DSD) feature can reduce power consumption by
powering down drive spindles. Which statements correctly describe the DSD feature? (Select two.)
A. Disk scrubbing is disabled when DSD is enabled.
B. Only RAID configured vdisks can be spun down.
C. Drive Spin Down delay defaults to 15 minutes.
D. Default state is enabled.
E. Only drives that reside in vdisks can be spun down.
Answer: A,C

certification HP   HP0-J51   certification HP0-J51   HP0-J51   HP0-J51 examen

NO.17 Which browser is supported to access X1000 Windows Server Remote Administration Applet from a
non-Microsoft computer?
A. Apple Safari
B. Google Chrome
C. Microsoft Internet Explorer
D. Mozilla Firefox
Answer: D

HP   HP0-J51 examen   HP0-J51   HP0-J51

NO.18 Which method of deduplication is used in the HP StoreOnce D2D devices?
A. fixed-length data segmenting
B. variable-length data segmenting
C. object-level differencing
D. hash-based chunking
Answer: D

HP   HP0-J51   certification HP0-J51   HP0-J51 examen

NO.19 The HP P2000 G3 FC Storage Array supports both the MSA70 and D2700 disk enclosures. When
connecting these enclosures to the P2000 G3 FC controller, where can the MSA70 enclosure be cabled
without limiting performance?
A. any location
B. before all D2700 enclosures
C. after all D2700 enclosures
D. after the first D2700 enclosure
Answer: C

HP examen   certification HP0-J51   certification HP0-J51   HP0-J51   HP0-J51   certification HP0-J51

NO.20 A customer has two HP P2000 G3 FC arrays. One is located at a remote branch office. You have been
asked to configure a replication set between the two arrays. Which components are required to form a
replication set? (Select two.)
A. external view volume
B. primary view volume
C. host accessible remote volume
D. destination snap pool
E. source snapshot
Answer: A,D

HP   HP0-J51   HP0-J51   certification HP0-J51

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.


没有评论:

发表评论