Pass4Test vous promet de vous aider à passer le test IBM 000-541, vous pouvez télécharger maintenant les Q&As partielles de test IBM 000-541 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
C'est sûr que le Certificat IBM 000-541 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test IBM 000-541, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat IBM 000-541 peut bien tester la professionnalité de IT.
Passer le test IBM 000-541, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification IBM 000-541. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification IBM 000-541.
Le test simulation IBM 000-541 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test IBM 000-541 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: 000-541
Nom d'Examen: IBM (DB2 9.7 DBA for Linux UNIX and Windows)
Questions et réponses: 104 Q&As
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 000-541 est lequel très important dans les tests de Certification IBM. Pour être qualifié de IBM, on doit obtenir le passport de test IBM 000-541.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM 000-541, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM 000-541 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM 000-541 sans aucune doute.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification IBM 000-541, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification IBM 000-541. Peut-être d'obtenir le Certificat IBM 000-541 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
000-541 Démo gratuit à télécharger: http://www.pass4test.fr/000-541.html
NO.1 Click the Exhibit button
Given the INSERT statements shown below:
INSERT INTO applicant VALUES (1 , ¯ ¡¯ 5 4
INSERT INTO applicant VALUES (2, 'F ¯, 38 )
INSERT INTO applicant VALUES (3, ® ¡¯, 2 1
INSERT INTO applicant VALUES (4, 'F ¯, 91 )
INSERT INTO applicant VALUES (5, 'C ¯, 50 )
INSERT INTO applicant VALUES (6, 'C ¯, 70 )
INSERT INTO applicant VALUES (7, 'C ¯, 95 )
How many rows will be successfully inserted?
A. 1
B. 3
C. 5
D. 7
Answer: C
certification IBM 000-541 000-541 000-541 000-541 examen
NO.2 Which two can be replicated using HADR? (Choose two.)
A. database configuration changes
B. CREATE TABLE ... NOT LOGGED INITIALLY operations
C. Data Definition Language (DDL) statements
D. LOAD operations
Answer: C D
certification IBM 000-541 examen certification 000-541 000-541
NO.3 A DBA wants to use Label Based Access Control (LBAC) to protect Individual
rows in a table.
Which data type must be used to create a column to hold the necessary LBAC
security data?
A. SYSPR0C.DB2LBACU\BEL
B. SYSPR0C.DB2SECURITYU\BEL
C. SYSIBM .DB2LBACLABEL
D. SYSIBM .DB2SECURITYLABEL
Answer: D
IBM 000-541 certification 000-541 000-541 000-541 examen certification 000-541
NO.4 .A database named PAYROLL was backed up on Sunday. On Tuesday, a table space
in the PAYROLL database was renamed from TBSP1 to EMPINFO_TBSP. On Thursday,
the database was restored from the backup image created on Sunday.
Which command must be issued to roll the renamed table space forward to the
current date and time?
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbspl)
B. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
TABLESPACE(empinfo_tbsp)
C. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
TO empinfo_tbsp)
D. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
RENAME empinfo_tbsp)
Answer: B
certification IBM 000-541 000-541
NO.5 Click the Exhibit button.
In the exhibit, where would the authentication of the supplied userid and
password from a remote client take place?
A. AIX operating system
B. LDAP Server
C. Kerberos Server
D. "MyPlugin.so" GSS-API plug-in
Answer: B
IBM 000-541 000-541 certification 000-541
NO.6 Click the Exhibit button.
Refer to the logging configuration parameters shown in the exhibit.
What will happen if there are currently 100 active log files and DB2 needs
to create log file 101?
A. At least one application will receive a "log full" error and at least one
transaction will be rolled back because the active log space is full.
B. Log file 101 will go into the OVERFLOWLOGPATH directory since the active
log space is full and infinite logging has been enabled.
C. The database will appear to be hung since the active log space is full
and the BLK_LOG_DSK_FUL parameter is set to YES.
D. Log file 101 will be successfully created in the primary log path since
infinite logging has been enabled. Applications will continue processing
normally.
Answer: D
IBM 000-541 examen 000-541 examen 000-541
NO.7 Due to an application error, some data was deleted from a very large table
residing in table space TS1. The table space was then renamed TS2 before the
error was detected. Rather than try and rebuild this table, it was decided
that database DB1 would be restored and then rolled forward to a point-in-time
(PIT) before the delete operation took place. Unfortunately the PiT roll
forward was done to a time that was too early and some critical transactions
were missing when the database was brought back on-line.
Which steps must be taken to ensure that the critical transactions which are
currently missing from the database are correctly applied to the database
and that table space TS1 is renamed TS2?
A 1. Restore database DB1.
2. Roll forward to the correct point-in-time.
3. Rename TS1 to TS2.
B 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to the correct point-in-time.
3. Rename table space TS1 to TS2.
4. Re-run the batch processes.
C 1, Restore database DB1
2. Roll forward to end of logs.
D 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to end of logs.
Answer: A
certification IBM certification 000-541 000-541 certification 000-541 000-541 examen 000-541 examen
NO.8 Which administrative authority is needed to run the audit stored procedures
and table functions such as the AUDIT_DELIM_EXTRACT stored procedure?
A DBADM
B SECADM
C SQLADM
D SYS ADM
Answer: B
IBM examen certification 000-541 000-541 examen
NO.9 Which two plug-in types does the DB2 database system provide? (Choose two.)
A. Group retrieval
B. Kerberos authentication
C. Server authentication
D. Encryption authentication
Answer: A C
IBM certification 000-541 000-541 examen 000-541 examen 000-541 certification 000-541
NO.10 Which statement is correct about informational constraints?
A. An informational constraint can be used by the SQL compiler to improve
the access to data and query performance.
B. The database manager uses an informational constraint to enforce the
uniqueness of the key during changes to the columns of the unique constraint.
C. An informational constraint is a column or combination of columns that
has the same properties as a unique constraint.
D. An informational constraint specifies that every row that is inserted or
updated in the table must conform to the definition of the table.
Answer: A
certification IBM 000-541 examen 000-541 000-541 examen
NO.11 Because of an application abend, a database named PAYROLL needs to be
restored to approximately 9:26 am on June 1, 2009. After the database is
restored from a backup image, the command shown below is executed:
ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002
USING LOCAL TIME AND STOP
When this command is executed, the error shown below is generated:
SQL4970N Roll-forward recovery on database "PAYROLL" cannot reach the
specified stop point (end-of-log or point-in-time) because of missing log
file(s) on node(s) "0".
Which two commands could be used to resolve this error? (Choose two.)
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
B. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP
C. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING LOCAL
TIME AND STOP OVERFLOW LOG PATH /mnt/arclog
D. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP NORETRIEVE MISSING RECORDS
Answer: A C
IBM 000-541 examen 000-541 examen
NO.12 What are three system and database level authorizations available with
DB2? (Choose three.)
A SYSMON
B SYSMNT
C DBCTRL
D SYS ADM
E DBADM
Answer: A D E
IBM certification 000-541 000-541 000-541
NO.13 What are three authorization categories in DB2? (Choose three.)
A System-level
B Database-level
C Network-level
D Object-level
E Instance-level
Answer: ABD
IBM 000-541 000-541 000-541
NO.14 Given the DDL shown below:
CREATE TABLE tab1 (coll SMALLINT );
CREATE VIEW v1 AS SELECT coll FROMtabl WHERE coll > 25 ;
CREATE VIEW V2 AS SELECT COI1 FROM v1 WITH CASCADED CHECK OPTION
CREATE VIEW v3 AS SELECT coll FROM v2 WHERE coll < 100 ;
Which statement will fail?
A. INSERT INTO v2 VALUES (35)
B. INSERT INTO v1 VALUES (5)
C. INSERT INTO v3 VALUES (25)
D. INSERT INTO v3 VALUES (200)
Answer: C
IBM examen 000-541 examen certification 000-541 000-541 certification 000-541
NO.15 A database administrator takes a full backup of the PRODUCTS database
every Sunday. During the week, two other backups are taken, one on Tuesday
and one on Thursday. The PRODUCTS database is about 800 GB in size, and about
20 percent of the data is modified throughout a week.
Assuming that backup times need to be kept to a minimum, which command should
be used to produce the Tuesday and Thursday backup images?
A. BACKUP DATABASE products TO /mnt/backup
B. BACKUP DATABASE products INCREMENTAL TO /mnt/backup
C. BACKUP DATABASE products TO /mnt/backup UTIL_IMPACT_PRIORITY 10
D. BACKUP DATABASE products INCREMENTAL DELTA TO /mnt/backup
Answer: D
IBM certification 000-541 000-541 000-541 000-541
NO.16 BOB and ALICE moved from the DEVELOPER group to the ANALYST group.
As the security administrator, which two commands would remove Bob and Alice
from the DEVELOPER group? (Choose two.)
A. REVOKE ROLE developer FROM bob, alice
B. REVOKE GROUP developer FROM bob, alice
C. REVOKE ROLE developer FROM USER bob, USER alice
D. REVOKE GROUP developer FROM USER bob, USER alice
Answer: A C
IBM certification 000-541 000-541 certification 000-541 certification 000-541 000-541 examen
NO.17 Which set of procedures will be required to perform a rolling upgrade
in a HADR environment?
A 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
B 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
C 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the new primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
D 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the standby database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
Answer: D
IBM 000-541 000-541 000-541 examen
NO.18 How does the DB2 Server identify the list of GSS-API plug-ins it supports?
A. by using the SRVCON_GSSPLUGIN_LIST database manager configuration
parameter
B. by using the SRVCON_GSSPLUGIN_LIST registry variable
C. by using the SRVSUPP_GSSPLUGIN_LIST database manager configuration
parameter
D. by using the SRVSUPP_GSSPLUGIN_LIST registry variable
Answer: A
IBM 000-541 000-541 000-541
NO.19 If a non-recoverable database crashes, how can a DBA successfully restart
the database if a table space is damaged and cannot complete crash recovery?
A. The database must be restarted using the RESTART DATABASE command with
the DROP PENDING TABLESPACES option specified. At that point, the database
can be brought on-line and the damaged table space must be dropped and
re-created.
B. The damaged table space must be restored from the latest backup and any
active transaction logs in the log path can then be applied to it using the
TABLESPACE ONLINE option of the ROLLFORWARD DATABASE command. This will bring
the table space on-line and synchronize it with the rest of the database.
C. The damaged table space must be restored from the latest backup image.
Once restored from the backup image, the RESTART DATABASE command can be issued
to apply all the relevant transactions from the active logs. At that point,
the database will come on-line and all table spaces will be synchronized.
D. The damaged table space will require that the entire database be restored
from the latest backup image because the database is non-recoverable and will
not be accessible.
Answer: A
IBM examen 000-541 certification 000-541 000-541 000-541
NO.20 Which HADR feature minimizes the impact of software maintenance on the
Standby server?
A. Configure all AUTOMATIC features.
B. Configure all AUTOMATIC maintenance parameters.
C. Configure AUTOMATIC maintenance and perform a rolling upgrade
D. Configure AUTOMATIC maintenance and perform a roll forward.
Answer: C
IBM certification 000-541 000-541 000-541 000-541
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification IBM 000-541. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
没有评论:
发表评论