Certification Microsoft 070-410 est un des tests plus importants dans le système de Certification Microsoft. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Microsoft 070-410 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Microsoft 070-410. Les documentations particulièrement visée au test Microsoft 070-410 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Microsoft 070-410.
Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 070-410, et les documentations à propos de rechercher le test Microsoft 070-410 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Pass4Test peut vous fournir un raccourci à passer le test Microsoft 070-410: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Microsoft 070-410. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.
Est-ce que vous vous souciez encore pour passer le test Microsoft 070-410? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Microsoft 070-410, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Microsoft 070-410. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Code d'Examen: 070-410
Nom d'Examen: Microsoft (Installing and Configuring Windows Server 2012)
Questions et réponses: 168 Q&As
070-410 Démo gratuit à télécharger: http://www.pass4test.fr/070-410.html
NO.1 Your network contains an Active Directory domain named adatum.com.The computer
accounts for allmember servers are located in an organizational unit (OU) named Servers.You link a
Group Policy object(GPO) to the Servers OU.You need to ensure that the domain s Backup Operators
group is a member of the local Backup Operators group on each member server.The solution must
not remove any groups from the local Backup Operators groups.What should you do?
A.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the This group
is a
member of list.
B.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the Members
of this
group list.
C.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the This group
is a
member of list.
D.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the Members
of this
group list.
Answer: C
certification Microsoft certification 070-410 070-410 070-410 examen certification 070-410 070-410
NO.2 You have a server that runs Windows Server 2012.The disks on the server are configured as shown
in the
exhibit.(Click the Exhibit button.) You need to create a storage pool that contains Disk 1 and Disk
2.What
should you do first?
A.Convert Disk 1 and Disk 2 to dynamic disks.
B.Delete volume E.
C.Convert Disk 1 and Disk 2 to GPT disks.
D.Create a volume on Disk 2.
Answer: B
Microsoft 070-410 070-410 070-410 examen 070-410
NO.3 Your network contains an Active Directory domain named adatum.com.The domain contains
several
thousand member servers that run Windows Server 2012.All of the computer accounts for the
member
servers are in an organizational unit (OU) named ServersAccounts.Servers are restarted only
occasionally.You need to identify which servers were restarted during the last two days.What should
you
do?
A.Run dsquery serverand specify the oparameter.
B.Run Get-ADComputerand specify the SearchScopeparameter.
C.Run Get-ADComputerand specify the lastLogonproperty.
D.Run dsquery computerand specify the stalepwdparameter.
Answer: C
Microsoft examen 070-410 070-410 certification 070-410 certification 070-410
NO.4 You install Windows Server 2012 on a standalone server named Server1.You configure Server1
as a VPN server.You need to ensure that client computers can establish PPTP connections to
Server1.Which two firewall rules should you create? (Each correct answer presents part of the
solution.Choose two.)
A.an inbound rule for TCP port 1723
B.an inbound rule for protocol 47
C.an inbound rule for TCP port 1701
D.an outbound rule for TCP port 1723
E.an outbound rule for protocol 47
F.an outbound rule for TCP port 1701
Answer: AB
Microsoft examen 070-410 examen 070-410 070-410
NO.5 Your network contains an Active Directory domain named adatum.com.The domain contains
three
domain controllers.The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.You plan to remove DC3 from the
domain.You
log on to DC3.You need to identify which service location (SRV) records are registered by DC3.What
should you do?
A.Open the %windir%\system32\dns\backup\adatum.com.dns file.
B.Open the %windir%\system32\config\netlogon.dns file.
C.Run ipconfig /displaydns.
D.Run dcdiag /test:dns.
Answer: B
Microsoft 070-410 examen 070-410 070-410 070-410
NO.6 You have a server named Server1 that runs Windows Server 2012.Server1 has the Hyper-V
server role
installed.Server1 is connected to two Fibre Channel SANs and is configured as shown in the
following
table.
You have a virtual machine named VM1.You need to configure VM1 to connect to SAN1.What
should you
do first?
A.Configure network adapter teaming.
B.Create a Virtual Fibre Channel SAN.
C.Create a Hyper-V virtual switch.
D.Add one HBA.
Answer: B
Microsoft examen 070-410 examen 070-410 070-410 certification 070-410
NO.7 You have a server named Server1 that runs Windows Server 2012.You need to remove
Windows
Explorer, Windows Internet Explorer, and all related components and files from Server1.What
should you
run on Server1?
A.msiexec.exe /uninstall iexplore.exe /x
B.msiexec.exe /uninstall explorer.exe /x
C.Uninstall-WindowsFeature Server-Gui-Shell -Remove
D.Uninstall-WindowsFeature Server-Gui-Mgmt-Infra -Remove
Answer: C
Microsoft certification 070-410 070-410 examen 070-410
NO.8 Note: This question is part of a series of questions that use the same or similar answer
choices.An
answer choice may be correct for more than one question in the series.Each question is
independent of
the other questions in this series.Information and details provided in a question apply only to that
question.Your network contains a server named Server1 that runs Windows Server 2012.Server1
has the
Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and
VM4.Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.You need to ensure that all of the traffic sent
to VM3
can be captured on VM2.What should you configure?
A.the startup order
B.Processor Compatibility
C.resource metering
D.Resource control
E.Port mirroring
F.Virtual Machine Chimney
G.Integration Services
H.Automatic Start Action
I.the VLAN ID
J.Single-root I/O virtualization
K.NUMA topology
Answer: E
certification Microsoft certification 070-410 070-410
NO.9 Your network contains an Active Directory domain named contoso.com.You log on to a domain
controller
by using an account named Admin1.Admin1 is a member of the Domain Admins group.You view the
properties of a group named Group1 as shown in the exhibit.(Click the Exhibit button.) Group1 is
located
in an organizational unit (OU) named OU1.You need to ensure that users from Group1 can modify
the
Security settings of OU1 only.What should you do from Active Directory Users and Computers?
A.Modify the Security settings of Group1.
B.Modify the Managed By settings on OU1.
C.Right-click contoso.com and select Delegate Control.
D.Right-click OU1 and select Delegate Control.
Answer: D
Microsoft 070-410 070-410 070-410
NO.10 Your network contains a file server named Server1 that runs Windows Server 2012.All client
computers
run Windows 8.You need to ensure that when users are connected to the network, they always use
local
offline files that are cached from Server1.Which Group Policy setting should you configure?
A.Turn on economical application of administratively assigned Offline Files.
B.Configure slow-link mode.
C.Configure Slow link speed.
D.Enable file synchronization on costed networks.
Answer: B
certification Microsoft 070-410 070-410 certification 070-410
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
没有评论:
发表评论